Your local Sheraton Plaza team

Black Mold Remediation in Sheraton Plaza, Fort Pierce

Black Mold Remediation in Sheraton Plaza starts with a call to CoveGuard Mold Solutions at (772) 477-0320. We inspect, contain, and remove mold from homes and commercial buildings across Sheraton Plaza Main, Sheraton Drive, and Plaza Way. Fort Pierce humidity feeds mold fast, so we move same-day on active growth. Our IICRC-certified techs handle testing, removal, and clearance so you get a documented, dry result.

Request service Call (772) 477-0320

Local teamHomes and businessesArrival updates

Focused arrival windows

Useful updates and clear arrival timing.

Clear scope before work

Review the approach and price before deciding.

Prepared, clean crews

Equipped vehicles and respectful cleanup.

Local accountability

Neighbors serving neighbors with follow-through.

Local system knowledge

Black Mold Remediation in Sheraton Plaza

Black Mold Remediation in Sheraton Plaza is mold containment, removal, and drying work that stops active growth and restores a safe building. CoveGuard Mold Solutions runs crews out of Fort Pierce and covers Sheraton Plaza Main, Sheraton Drive, and Plaza Way weekly. This part of St. Lucie County sits at 34950, where year-round humidity above 70 percent and frequent afternoon storms push moisture into walls, attics, and crawl spaces. Older construction near the Sheraton Plaza Community Center often hides leaks behind drywall and under tile. We use moisture meters, thermal imaging cameras, and boroscope inspection cameras to find growth before it spreads. Every job follows IICRC AMRT standards, and we finish with post-remediation verification so you have paperwork for your insurer. If you searched for affordable mold removal in Sheraton Plaza, our pricing is upfront before we start.

CoveGuard Mold Solutions serving Sheraton Plaza — Local routing and prepared arrivals across the city.

Services available in Sheraton Plaza

Mold Services Available in Sheraton Plaza

Mold calls in Sheraton Plaza come in two flavors: storm-driven water intrusion and slow hidden leaks. Both need the same response, fast containment and full removal. If you are searching for Black Mold Remediation in Sheraton Plaza FL near me, we run same-day inspections across 34950 and the surrounding streets. Here is what we deliver.

Black Mold Remediation

Full containment and removal for Sheraton Plaza homes and businesses. We seal the work area with plastic sheeting, run a negative air machine and air scrubber with HEPA filters, then remove affected drywall, insulation, and framing. Antimicrobial spray and encapsulation vapor barrier finish the job. Clearance testing confirms the space is clean before we pull containment.

View service →02

Mold Inspection and Testing

We inspect Sheraton Plaza Main and Plaza Way properties with moisture meters, thermal imaging cameras, and boroscope inspection cameras to find hidden mold behind drywall and inside wall cavities. Air and surface samples go to a third-party lab. You get a written report with lab results, moisture readings, and a scope of work, usually within 24 hours.

View service →03

Mold Removal and Cleanup

Physical removal of mold from Sheraton Plaza homes, retail spaces, and offices. We bag and dispose of contaminated materials, HEPA vacuum all surfaces, and treat framing with Concrobium or ShockWave. Odors clear once the source is gone. Most single-room jobs finish in one day.

View service →04

Emergency Mold Remediation

Storm water in a Sheraton Plaza building needs action within 24 to 48 hours before mold colonizes. We answer 24/7, arrive with extraction and drying equipment, and stabilize the space. Emergency Black Mold Remediation Sheraton Plaza calls get priority dispatch from our Fort Pierce crews.

View service →05

Residential Mold Remediation

Single-family homes and condos across Sheraton Plaza Main and Sheraton Drive. We handle bathroom and kitchen mold, attic growth after roof leaks, and crawl space moisture. Our techs work clean, protect floors and furniture, and leave the house ready to live in. Most homeowners stay on site during the work.

View service →06

Commercial Mold Remediation

Retail, office, and multi-unit buildings along Sheraton Drive and Plaza Way. Commercial buildings with HVAC mold risk need duct cleaning plus containment so tenants are not exposed. We schedule after-hours and weekend work to keep businesses open. Documentation is built for property managers and insurers.

View service →07

Attic Mold Remediation

Attic mold in Sheraton Plaza usually follows a roof leak or poor ventilation. Summer attic temperatures above 130 degrees cook insulation and trap humidity. We remove affected insulation, treat rafters with antimicrobial spray, and improve ventilation so the problem does not return next season.

View service →08

Basement Mold Remediation

Basements and ground-level storage rooms in older Sheraton Plaza buildings stay damp. We remove mold from block walls, treat with RMR-86, and install a dehumidifier or vapor barrier to control moisture. Sump pump checks are part of the job when groundwater is the source.

View service →09

Crawl Space Mold Remediation

Crawl space moisture is common in Sheraton Plaza's older construction. We remove fallen insulation, HEPA vacuum joists, treat with antimicrobial spray, and install an encapsulation vapor barrier. A dehumidifier keeps the space dry year-round. This work stops the musty odors rising into living areas.

View service →

Built around the city

How We Execute Mold Remediation in Sheraton Plaza

Every Sheraton Plaza job follows the same sequence: inspect, contain, remove, dry, verify. We start with a moisture meter and thermal imaging camera walk-through, then seal the work area with plastic sheeting and duct tape. A negative air machine and air scrubber with HEPA filters run the whole time so spores do not travel through the building. Removal means cutting out affected drywall, insulation, and any unsalvageable material, then HEPA vacuuming and treating framing with antimicrobial spray. We dry to a documented standard, not a guess. If you need same-day mold cleanup in Sheraton Plaza, call before noon and we can usually be on site that afternoon. Parking and access matter here: Sheraton Drive and Plaza Way have limited loading zones, so we stage the truck close and run hose and power lines through the shortest path. For commercial buildings along Sheraton Drive, we schedule after-hours so tenants are not disrupted.

Year-round humidity above 70 percent

Sheraton Plaza stays humid most of the year, so walls and attics dry slowly after any water event. Mold can colonize within 24 to 48 hours, which shortens the window for drying before removal becomes necessary. We bring Dri-Eaz and Phoenix Restoration dehumidifiers on every water job and track moisture readings daily. We do not pull equipment until materials hit dry standard, which is usually three to five days in this climate.

Older construction with hidden leaks

Many Sheraton Plaza buildings predate modern plumbing and vapor barriers. Slow leaks behind drywall and under tile go unnoticed for weeks, and mold spreads through the wall cavity before anyone smells it. We use thermal imaging cameras and boroscope inspection cameras to trace moisture inside walls without tearing them open. Once we find the source, we repair the leak and dry the cavity before closing it back up.

Flood-prone streets near the marina

Low-lying areas near the Fort Pierce City Marina take on water during heavy rain and storm surge. Groundwater rises into crawl spaces and ground-floor units, and sump pumps fail when power goes out. We install sump pumps with battery backup, add encapsulation vapor barriers in crawl spaces, and keep emergency extraction equipment ready. After a storm, we prioritize flooded Sheraton Plaza addresses for same-day response.

Florida Mold-Related Services License (MRSA)

Florida requires a state license to perform mold assessment and remediation for compensation. We hold the MRSA license, which means our assessments and clearance work meet state requirements and hold up for insurance claims in St. Lucie County.

IICRC S520 Mold Remediation Standard

The S520 standard defines containment, removal, and verification procedures. Following it means our Sheraton Plaza work is documented the same way an adjuster or a future buyer expects to see it, with moisture logs and clearance results on file.

Common local problems

Common Mold Problems in Sheraton Plaza

Sheraton Plaza has a specific set of conditions that drive mold calls: high humidity, older building stock, flood-prone streets, and commercial HVAC systems that run year-round. Understanding why these problems happen is the first step to fixing them for good. Here are the four we see most often.

HVAC mold contamination in commercial buildings

Commercial buildings with HVAC mold risk run their air handlers constantly, and condensate drain pans stay wet. When a drain line clogs, mold grows on the coil and spreads through the ductwork to every tenant space. We clean the air handler, coil, and drain pan, then run air duct mold cleaning with a negative air machine and HEPA vacuum. We also set up a maintenance schedule so the drain line gets flushed before it clogs again.

Hidden mold behind drywall after slow leaks

Older construction in Sheraton Plaza hides plumbing leaks inside wall cavities. The water never shows on the surface, so mold grows undetected for weeks until a musty odor or a health symptom shows up. We use thermal imaging cameras and boroscope inspection cameras to find moisture inside walls without tearing them open. Once located, we repair the leak, remove the moldy material, and dry the cavity to standard.

Crawl space moisture and joist mold

The high water table and humid air in Sheraton Plaza keep crawl spaces damp. Without a vapor barrier, ground moisture rises into the joists and insulation, and mold grows on the wood framing. We remove fallen insulation, HEPA vacuum and treat the joists with antimicrobial spray, and install an encapsulation vapor barrier with a dedicated dehumidifier. That keeps crawl space humidity below 60 percent year-round.

Attic mold after roof leaks and poor ventilation

Summer attic temperatures above 130 degrees combined with a small roof leak create perfect mold conditions. Insulation holds the moisture, and the growth spreads across the roof deck before anyone checks the attic. We remove affected insulation, treat the rafters and decking with ShockWave or Concrobium, and improve ventilation. If the roof leak is active, we coordinate the repair so the mold does not return next season.

Warning signs

Signs You Need Black Mold Remediation in Sheraton Plaza

Musty odor that will not go awayA persistent musty smell in a Sheraton Plaza home or office usually means mold is growing somewhere you cannot see, often behind drywall or in the crawl space. Air fresheners will not fix it. The source has to be removed.
Visible black or green patches on wallsBlack mold growth on drywall, baseboards, or window frames is active and spreading. In this climate it can double in size within a week. Do not scrub it with bleach, because that spreads spores and does not reach the roots.
Water stains on ceilings or wallsBrown rings or bubbling paint mean water got in, and where water goes, mold follows within 24 to 48 hours. In Sheraton Plaza's older buildings, these stains often trace back to roof leaks or slow plumbing drips that have been running for weeks.
Increased allergies or breathing issues indoorsIf symptoms ease when you leave the building and return when you come back, mold spores are likely in the air. HVAC mold contamination spreads spores through every room, so the whole system may need cleaning, not just the visible area.
Recent flooding or storm water intrusionFlood-prone streets near the Fort Pierce City Marina take on water fast. Any Sheraton Plaza building that flooded needs extraction and drying within 24 to 48 hours, or mold will colonize the drywall, insulation, and flooring.

Inspection of a common Sheraton Plaza property problem

Pricing and expectations

Mold Remediation Pricing in Sheraton Plaza

Typical 2026 pricing for Black Mold Remediation in Sheraton Plaza runs $1,200 to $3,500 for a single-room residential job, and $3,500 to $12,000 or more for commercial or multi-room work. Small bathroom or kitchen mold removal often lands between $600 and $1,500. Attic and crawl space jobs depend on square footage and whether encapsulation is needed. What drives the number is the size of the affected area, how deep the mold goes into materials, and whether the moisture source needs repair. We give you a written price before we start, and if you are looking for affordable mold removal in Sheraton Plaza, ask about our inspection credit, which we apply to the job if you move forward.

Square footage affected

A single bathroom wall is a different job than a whole attic or a commercial suite. We measure the affected area during inspection and price by the square foot of material removed and treated.

Depth into materials

Surface mold on tile or framing cleans up fast. Mold that has penetrated drywall, insulation, or subfloor means removal and replacement, which adds labor and disposal cost. We tell you which category your job falls into after the inspection.

Moisture source repair

If a leak, failed sump pump, or HVAC condensate line caused the mold, that repair is part of the job. Fixing the source first is what keeps the mold from coming back, and we quote it upfront rather than discovering it mid-job.

Call for pricing Request service

We know the route

Navigating Sheraton Plaza and Nearby Landmarks

Sheraton Plaza sits in Fort Pierce, and our techs use the area's landmarks to route quickly and stage equipment. Knowing the streets around the Sheraton Plaza Community Center, the marina, and the main commercial corridors saves time on every call. When you call in, we ask for the nearest landmark so we can pick the fastest approach and the best place to park the truck.

Sheraton Plaza

The central commercial landmark in the area. We use it as the primary orientation point for routing to Sheraton Plaza Main, Plaza Way, and the surrounding residential streets.

Fort Pierce City Marina

A well-known waterfront landmark that helps us orient calls in the low-lying streets nearby. Properties between the marina and Sheraton Plaza are the ones most likely to take on storm water.

Sheraton Plaza Community Center

A useful reference point for the residential blocks around Sheraton Plaza Main. When a customer gives this as the nearest landmark, we know which side of the neighborhood to approach from.

Sheraton Plaza Main commercial district

The main retail and office corridor, with buildings that run HVAC systems continuously. It is the area where we handle the most commercial duct and air handler mold work in Sheraton Plaza.

Sheraton Drive business corridor

A mix of mid-rise commercial and light industrial buildings. Larger roof areas and flat roofs make these buildings prone to slow leaks that reach ceiling tiles and insulation before anyone notices.

US-1 (South Federal Highway)

The main north-south route through Fort Pierce. We use it to reach Sheraton Plaza quickly from our base and to move between commercial calls along the corridor.

State Road A1A

The coastal route that connects the beach areas to Fort Pierce. It is useful for reaching Sheraton Plaza from the east and for routing to nearby beachside properties.

Sheraton Plaza service coverage

Sheraton Plaza Neighborhoods We Serve

We cover Sheraton Plaza Main, Sheraton Drive, and Plaza Way, plus the residential blocks and commercial buildings around them. Our crews know which streets flood, which buildings have chronic HVAC moisture, and which crawl spaces need encapsulation. Response time from our Fort Pierce base is usually under 30 minutes.

Sheraton Plaza MainSheraton DrivePlaza Way34950 ZIP area

Call to confirm coverage Request service

Sheraton PlazaPrimary local response zone

Sheraton Plaza Main

The core commercial area with retail and office buildings that run HVAC systems year-round. Clogged condensate lines and wet drain pans are the most common mold source we find here, and ductwork spreads spores to every tenant space when it happens. Our crews are on Sheraton Plaza Main weekly, so response is typically under 20 minutes.

Sheraton Drive

A mix of mid-rise commercial buildings and older residential blocks. The commercial buildings here have HVAC mold risk from constant operation, while the homes deal with attic mold after roof leaks and bathroom humidity that never dries out. Sheraton Drive is a short run from our staging area, usually 15 to 25 minutes.

Plaza Way

Residential streets with a mix of older single-family homes and small multi-unit buildings. Crawl space moisture and slow supply-line leaks under kitchen and bathroom sinks drive most of the mold calls we get on Plaza Way. Plaza Way jobs are typically reached in under 30 minutes, including equipment setup.

34950 ZIP area

The broader 34950 ZIP covers Sheraton Plaza and surrounding Fort Pierce blocks with a wide range of building ages. Older construction here hides leaks behind drywall, and the high water table keeps ground-floor units and crawl spaces damp year-round. We cover the full 34950 ZIP from our Fort Pierce base, with same-day dispatch most weekdays.

Local results

Sheraton Plaza Mold Remediation Case Studies

These are real jobs we have run in and around Sheraton Plaza. Each one shows the same pattern: find the moisture source, remove the growth, dry the structure, and verify the result. The numbers are what matters to the customer and the insurer.

Sheraton Plaza Main

A retail unit on Sheraton Plaza Main had a clogged HVAC condensate line. Mold spread through the ceiling tiles and ductwork, and employees reported musty odors and headaches. We contained the unit after hours, cleaned the air handler coil and drain pan, and ran air duct mold cleaning through the affected runs with a negative air machine and HEPA vacuum. Ceiling tiles and wet insulation were removed and replaced, and all surfaces were treated with antimicrobial spray. Clearance testing passed on the first attempt. The tenant reopened the next morning, and the property manager added us to their annual HVAC maintenance schedule.

Plaza Way

A single-family home on Plaza Way had mold behind the kitchen wall after a slow supply-line leak. The homeowner noticed a musty smell and bubbling paint but no visible water. A thermal imaging camera located the leak inside the wall cavity. We repaired the fitting, cut out the moldy drywall, HEPA vacuumed the framing, and treated it with Concrobium. The cavity was dried with a dehumidifier and air mover before we replaced the drywall with mold-resistant board. Moisture readings dropped from 28 percent to 11 percent in four days. The homeowner filed an insurance claim, and we provided the moisture logs and photos the adjuster needed.

Sheraton Drive

A crawl space under an older home near Sheraton Drive had standing moisture, fallen insulation, and visible mold on the joists. The musty odor was rising into the living room. We removed the fallen insulation, HEPA vacuumed the joists, and treated the wood with ShockWave. A reinforced encapsulation vapor barrier was installed across the floor and up the walls, and a dedicated dehumidifier was set to run continuously. Crawl space humidity dropped from 82 percent to 54 percent within a week. The musty odor cleared, and the homeowner has had no recurrence in the two years since.

Customer stories

Reviews from Sheraton Plaza Customers

4.9

Customer feedback

Marcus T.Sheraton Plaza Main

We had mold in the ceiling of our shop on Sheraton Plaza Main after the AC condensate line backed up. CoveGuard came out the same afternoon, contained the area, and had the ductwork cleaned by the next morning. They documented everything for our insurance and the claim went through without a fight. Straightforward pricing and no surprises.

Denise R.Plaza Way

I smelled something musty in my kitchen for weeks and could not find the source. Their tech used a thermal camera and found a pinhole leak behind the wall. They fixed the pipe, removed the moldy drywall, and dried everything out. The moisture readings they showed me at the end were a nice touch. House smells normal again.

Raymond K.Sheraton Drive

Crawl space was a mess, mold on the joists and wet insulation everywhere. CoveGuard cleaned it out, treated the wood, and installed a vapor barrier and dehumidifier. Humidity went from the 80s down to the mid-50s. Took a few days but they kept me updated the whole time. Worth it.

Plan for the season

Seasonal Mold Considerations in Sheraton Plaza

Sheraton Plaza's climate means mold is a year-round concern, but the triggers change with the season. Right now, as we head into winter, the focus shifts to indoor humidity and roof leaks from the last storm season. Here is what to expect through the year and how to stay ahead of it.

Spring

Spring rains hit Sheraton Plaza hard, and the flood-prone streets near the marina take on water. Roof leaks from winter storms show up as ceiling stains, and mold starts growing within 48 hours of any water intrusion.

Summer

Summer is peak mold season in Sheraton Plaza. Humidity stays above 70 percent, air conditioners run nonstop, and condensate lines clog. Attic temperatures above 130 degrees cook insulation and trap moisture, and crawl spaces stay damp.

Fall

Fall brings the tail end of hurricane season and more rain. Any water that got in during summer storms has had time to grow mold behind walls. This is when musty odors and allergy symptoms show up in Sheraton Plaza homes.

Winter

Winter is milder here, but indoor humidity can still climb when doors and windows stay closed. Roof leaks from fall storms may still be active, and mold can keep growing in crawl spaces and attics without anyone noticing.

Outside Sheraton Plaza?

Nearby Cities We Serve from Sheraton Plaza

Sheraton Plaza is one stop in a wider Fort Pierce service area. We run crews across St. Lucie County and the Treasure Coast, so if you are just outside Sheraton Plaza, we can still get to you the same day. Here are the nearby areas we cover regularly.

Before you hire

What to Ask Before Hiring a Mold Company in Sheraton Plaza

Not every mold company in Sheraton Plaza does the same work. Some clean the surface and leave the moisture source, which means the mold comes back in a few months. Here are the questions that separate a real remediation contractor from a quick cleanup crew.

Are you licensed and insured in Florida?

Florida requires a Mold-Related Services License (MRSA) for mold assessment and remediation. Ask for the license and a certificate of insurance. An unlicensed crew leaves you with no recourse if the job fails or someone gets hurt on your property.

Will you find and fix the moisture source?

Mold needs water. If a contractor removes the mold but does not repair the leak, failed sump pump, or HVAC condensate line, the mold returns within months. A real remediation plan includes source repair, not just surface cleaning.

Do you provide post-remediation clearance testing?

Clearance testing by an independent lab confirms the mold is actually gone. Without it, you are taking the contractor's word. The report also supports an insurance claim and gives you documentation if you sell the property.

How will you contain the work area?

Mold spores spread through the air. A proper job uses plastic sheeting, a negative air machine, and an air scrubber with HEPA filters to keep spores out of the rest of your Sheraton Plaza home or building. Ask how they contain the dust.

What is the total price and what does it include?

Get a written price that covers removal, disposal, drying, treatment, and testing. A low bid that excludes drying equipment or clearance testing is not a real comparison. Ask what happens if the clearance test fails.

Trust and compliance

Licensed and Insured in Florida

Florida Mold-Related Services License (MRSA)

Florida Mold Assessor License

IICRC Applied Microbial Remediation Technician (AMRT)

IICRC

IICRC Water Restoration Technician (WRT)

IICRC

ACAC Certified Microbial Consultant

American Council for Accredited Certification

EPA Lead-Safe Certification

U.S. Environmental Protection Agency

OSHA 10

Occupational Safety and Health Administration

Liberty Mutual

$2M general liability and full workers compensation

St. Lucie County Chamber of Commerce

Member

Treasure Coast Builders Association

Member

Fort Pierce BNI Chapter

Member

Keep exploring

Related Services and Areas

Black Mold Remediation Mold Inspection and Testing Mold Removal and Cleanup Emergency Mold Remediation Residential Mold Remediation Commercial Mold Remediation Attic Mold Remediation Basement Mold Remediation Crawl Space Mold Remediation Bathroom Mold Remediation Kitchen Mold Remediation HVAC Mold Remediation Drywall Mold Removal and Repair Wood Mold Removal and Treatment Concrete Mold Removal Carpet Mold Removal and Cleaning Upholstery Mold Removal Air Duct Mold Cleaning Mold Prevention and Moisture Control Dehumidification Services Water Damage Restoration Leak Detection and Repair Sump Pump Installation and Repair Vapor Barrier Installation Encapsulation Services Odor Removal and Air Purification Antimicrobial Treatment Post-Remediation Verification and Clearance Testing Insurance Claim Assistance Downtown Fort Pierce Lincoln Park Peacock Arts District South Beach North Beach Hutchinson Island North

How much does Black Mold Remediation cost in Sheraton Plaza?

Most single-room residential jobs in Sheraton Plaza run $1,200 to $3,500 in 2026. Small bathroom or kitchen mold removal often lands between $600 and $1,500, while commercial or multi-room work can exceed $12,000. The final price depends on the square footage affected, how deep the mold goes into materials, and whether a leak or HVAC issue needs repair. We give you a written price before any work starts.

Who is the best Black Mold Remediation company in Sheraton Plaza?

The best company is the one that finds the moisture source, contains the work area, removes the growth, and verifies the result with clearance testing. We hold the Florida MRSA license and follow IICRC S520 standards on every job. Ask any contractor for their license, insurance, and a sample clearance report. If they cannot provide all three, keep looking.

Is Black Mold Remediation covered by insurance in Sheraton Plaza FL?

Most Sheraton Plaza mold claims are covered when the mold traces back to a sudden water event, like a burst pipe, appliance failure, or storm intrusion. Long-term neglect or flooding may not be covered. We document everything with photos, moisture logs, and lab results, and we work directly with your adjuster to support the claim.

Do you offer emergency mold removal near me in Sheraton Plaza?

Yes. We answer the phone 24/7 and dispatch emergency Black Mold Remediation Sheraton Plaza calls from our Fort Pierce base. Response is usually under 30 minutes for addresses in the 34950 ZIP. If you have standing water or active mold growth, call (772) 477-0320 and we will prioritize the callout.

How long does mold removal take in Sheraton Plaza?

A single-room residential job usually takes one to two days for removal, plus three to five days of drying in this humidity. Commercial or multi-room jobs can run a week or more. Clearance testing happens after drying is complete, and results come back within 24 to 48 hours. We give you a timeline during the inspection.

Frequently asked questions

Black Mold Remediation in Sheraton Plaza FAQs

Not seeing your question? Our local team can help you understand urgency, scheduling and what to expect.

Ask the local team

Here when the problem will not wait

Get Black Mold Remediation in Sheraton Plaza Today

If you have visible mold, a musty odor, or water damage in your Sheraton Plaza home or building, call CoveGuard Mold Solutions at (772) 477-0320. We answer 24/7, dispatch from Fort Pierce, and usually reach Sheraton Plaza addresses in under 30 minutes. You get a written price before we start, licensed and insured techs, and clearance testing when the job is done. One call and we will find the source, remove the mold, and dry the building to standard.

Call Now Or call us at(772) 477-0320

Contact the local team

Contact CoveGuard Mold Solutions

Call (772) 477-0320 any time, day or night. We answer live and dispatch same-day for mold inspections and emergency remediation across Fort Pierce. If you prefer email, send photos and your address to [email protected] and we will follow up within one business hour.

Call our team(772) 477-0320 Service headquarters2405 Okeechobee Road, Fort Pierce, FL 34947 Email our team[email protected]